1035 Carbon Steel Rod
1035 steel bar is most commonly characterized as a medium carbon grade, and as such is a popular “workhorse” grade of steel.
1035 steel bar is often supplied in hot rolled, cold drawn, turned & polished, annealed, and or coated conditions; both in bar lengths or packaged into wire rod.
AISI 1035 steel is a medium tensile steel supplied in the black hot rolled or normalized condition. It has a Brinell hardness ranging between 170 and 210 and tensile strength of 570 – 700 MPa. AISI 1035 steel has good machinability, good weldability, and high strength and impact properties in either the normalized or hot rolled condition. SAE 1035 steel has a low through-hardening capability with only sections of size around 60 mm being recommended as suitable for tempering and through-hardening. However, it can be efficiently flame or induction hardened in the normalized or hot rolled condition to obtain surface hardnesses in the range of Rc 54 – Rc 60 based on factors such as section size, type of setup, quenching medium used ,etc.
Product Description
| Product | 1035 Carbon Steel Rod |
| Standard | AISI, ASTM, BS, DIN, EN, GB, JIS |
| Material | Q195, Q235, 10#, 20#, 35#, 45#, Q215, Q345, 12Cr1MoV, 15CrMo, 304, 316, 20Cr, 40Cr, 20CrMo, 35CrMo, 42CrMo, 40CrNiMo, GCr15, 65Mn, 50Mn, 50Cr, 3Cr2W8V, 20CrMnTi, 5CrMnMo |
| Diameter | 10-600mm |
| Length | 1-12m |
| Technique | Hot rolled, cold rolled, Cold Drawn |
| Surface Treatments | Oil printed, black printed |
| Application | Manufacture of petroleum, chemical, gas separation, and shipping containers or other similar devices, such as various tower vessels, heat exchangers, storage tanks and tank cars, etc. |
| Package | By bundles, each bundle weighs under 3 tons |
1035 Carbon Steel Chemical Composition
1035 carbon steel is classified as a medium carbon steel, with a specific composition that defines its properties.
| Element | Content |
| Silicon (Si) | ≤0.35% |
| Manganese (Mn) | 0.60%-0.90% |
| Sulfur (S) | ≤0.050% |
| Phosphorus (P) | ≤0.040% |
The balance of these elements results in a material that combines moderate strength with excellent formability, making it suitable for a wide range of industrial applications.
1035 Carbon Steel Mechanical Properties
1035 carbon steel exhibits reliable mechanical properties, distinguishing it as a widely used material in manufacturing.
| Property | Value |
| Tensile Strength | 585-660MPa |
| Yield Strength | 370-530MPa |
| Elongation | 17%-23% |
| Brinell Hardness | 170-210HB |
SAE 1035 Carbon Steel Round Bar Physical Properties
| Physical Properties | Metric | Imperial |
| Density | 7.85 g/cm3 | 0.284 lb/in3 |
1035 is a versatile medium-carbon steel grade that has an exceptional balance of strength and ductility, making it well-suited for a range of industrial applications where mechanical properties, such as tensile strength and toughness, are critical and where extreme hardness or wear resistance are not primary concerns. 1035 steel is commonly found in forged parts, automotive components, and machinery.
1035 Carbon Steel Applications
Mechanical manufacturing: commonly used in the manufacture of various mechanical parts. Such as gears, shafts, connecting rods, crankshafts, shafts, pins, levers, beams, sleeves, rims, washers, and so on.
Automobile manufacturing: can be used to manufacture automobile crankshafts, suspension parts, engine parts, transmission parts, wheel hubs, bolts, nuts, etc..
Energy: in energy production equipment, such as turbines and generators.
Agricultural machinery: can be used in the manufacture of agricultural machinery and equipment in a variety of parts.
Aerospace: can be used to manufacture parts such as landing gears for airplanes.
Shipbuilding: it has a certain degree of corrosion resistance, and can be used to manufacture some structural parts, shaft parts, propellers, etc. of ships.
Application
Agricultural Modernization
Construction Engineering
Environmental Protection Engineering
Food Processing Industry
Intelligent Home Appliances
Medical and Health Field
New Energy Infrastructure
