5005 Aluminum Sheet
Aluminum 5005 is a medium-strength aluminum alloy with a small amount of magnesium as its primary alloying element. It has good formability, and may be suitable for applications that require bending, spinning, drawing, stamping, and roll forming. It is often used for applications that require an anodized finish.
5005 aluminum sheet is an aluminum-magnesium alloy material with medium strength and good corrosion resistance. Its magnesium content is relatively low, so its corrosion resistance is slightly higher than that of 3 series alloys. It is similar in performance to 3003 aluminum alloy and has good strength. Widely used in construction, transportation, electronics and other fields. Details as follows: 1. Processing and application: The 5005 aluminum sheet exhibits good processability and weldability, and the modification processing effect after anodization is satisfactory, allowing it to coordinate well with the color of the 6063 profile. This makes it widely used in architectural decoration, vehicle interior and exterior decoration, etc. 2. Physical properties: According to the standard GB/T 8544-1997, the tensile strength of 5005 aluminum alloy is between 155 and 195 MPa. 3. Form and specifications: 5005 aluminum plates can be delivered in flat sheets or rolls, with commonly used specifications and thicknesses to meet the needs of different uses.
Product Description
| Product | 5005 Aluminum Sheet |
| Standards | JIS, AISI, ASTM, GB, DIN, EN, etc. |
| Surface Treatments | Coated, Embossed, Brushed, Polished, Anodized, etc. |
| Temper | O, H112, H12, H14, H16, H18, H19, H22, H24, H26, H28, H32, H34, H36, H38 |
| Thickness | 0.1-500mm (customizable) |
| Width | 100-2650mm |
| Packing | Customized (out-of-stock options available) |
| Applications | High-end wide-width curtain wall panels, architectural decorations, automotive interior materials, instrument panels, anodized materials, cooking utensils, conductors, etc. |
| MOQ | 1 Ton |
Chemical Composition of 5005 Aluminum Sheet
Compositions are listed as weight percent. Limits are given as a maximum unless indicated as a range.
| Element | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others-Each | Others Total | Al Min |
| 5005 | 0.30 | 0.7 | 0.20 | 0.20 | 0.5-1.1 | 0.10 | 0.25 | – | 0.05 | 0.15 | Remainder |
Composition according to the Aluminum Association
Physical properties for 5005 Aluminum Sheet
| Physical Property | Value |
| Density | 2.70 g/cm³ |
| Melting Point | 655 °C |
| Thermal Expansion | 23.5 x10^-6 /K |
| Modulus of Elasticity | 69.5 GPa |
| Thermal Conductivity | 201 W/m.K |
| Electrical Resistivity | 0.033 x 10^-6 Ω. .m |
| Electrical Resistivity | 52 % IACS |
Spec: BS EN 485-2:2008
Aluminium Sheet – 0.2mm to 12.5mm
Mechanical Properties for Type 347 stainless steel
| Alloy and Temper | Thickness mm | Tensile Strength | Elongation (% min in 50mm) | ||||
| Over | Up to | Ultimate | Yield | ||||
| Min | Max | Min | Max | ||||
| 5005-O | 1.2 | 6.3 | 105 | 145 | 35 | – | 21 |
| 5005-H14 | 1.2 | 6.3 | 145 | 185 | 115 | – | 3 |
| 5005-H34 | 1.2 | 6.3 | 140 | 180 | 105 | – | 5 |
| 3003-H14 | 1.2 | 6.3 | 140 | 180 | 115 | 5 | |
| 5052-H32 | 0.63 | 50 | 215 | 265 | 160 | – | 5-11 |
| 5052-H38 | 0.63 | 3.20 | 270 | – | 220 | – | 4 |
Temper Types
The most common temper for 5005 aluminium is:
H34 – Stabilised – A low temperature thermal treatment or heat introduced during manufacture which stabilises the mechanical properties and relieves residual internal stress, plus usually improves ductility.
Applications of 5005 Aluminium Sheet
5005 aluminium sheet can be used as a high-end wide-format curtain wall material, which has the advantage of an excellent anodic oxidation effect compared with the commonly used 3003 aluminium sheet for curtain wall. In addition, 5005 aluminium alloy is light, only one-fifth of the marble, one-third of the glass curtain wall, and can be perfectly combined with the glass and stone curtain wall material, presenting a fashion, trend, and unique modern architectural style. It is worth mentioning that the cost-effective price, as well as the low maintenance cost in the later period, make the architects more favorable to the 5005 aluminium sheet!
Application
Agricultural Modernization
Construction Engineering
Environmental Protection Engineering
Food Processing Industry
Intelligent Home Appliances
Medical and Health Field
New Energy Infrastructure
